INSTRUCTIONS FOR USE
CHARGING THE CLIPPER
(FOR CORDLESS OPERATION)
The charging cord can be placed into the charging stand (as assembled)
or removed & placed directly into the base of the clipper.
1. Plug the transformer into a 100V - 240V power supply.
2. Place the appliance onto the charging stand or plug the adaptor
into the base of the clipper, ensuring that the appliance is
switched off. The charging light will illuminate when the adaptor
is correctly inserted into the clipper and connected to the mains
power supply. The battery charge level icon will show on the LCD
display - fl ashing whilst charging and solid when fully charged.
The battery charge level will visually decrease during use. The fi rst
segment in the battery iron will fl ash when the clipper requires
recharging.
3. A 2 hour full charge will provide 60 minutes usage time.
CORDED USE – OPERATION WITH POWER CORD
1. Remove the power cord adaptor from the charging base.
2. Plug the power cord adaptor directly into the clipper.
3. Plug the cord into a 100V - 240V power supply.
4. Press On/Off button.
NOTE: If battery power is very weak, wait about 1 minute before
pressing On/Off button.
To remove plug adaptor from charging base
- turn base over to underside with cord facing you.
- using your thumb, push the adaptor cover to the right until it
pivots clear of the inserted plug adaptor.
- pull plug adaptor upwards to remove from base.
MULTI VOLTAGE
This appliance has a multi voltage feature for worldwide use. The
voltage automatically converts for ease of use from 100v - 240v.
This appliance has an automatic internal converter which will
automatically convert the voltage without the need of a switch.
A suitable plug adaptor will be required, please refer to the chart
below.
IMPORTANT: Before using the appliance for the fi rst time, charge
for a full 16 hour continuous charge. Maximum battery capacity
will only be reached after 3 charging and discharging cycles.
After 3 cycles, the clipper has a 2 hour quick charge. In order to
maintain optimum capacity of the rechargeable batteries, every
3 months the clipper should be recharged for 16 hours.
Plug adaptor
required
Voltage and
plug adaptors
Country
Voltage
setting
British plug:
240V
Ireland, Great Britain, Singapore, South America,
Hong Kong (parts only), Africa (parts only)
240V
European plug:
240V
Asia, Europe, Middle East Noumea, Scandinavia,
South America, Hong Kong (parts only)
240V
Australian and
New Zealand
plug: 240V
Australia, New Zealand
240V
American
plugs: 120V
North America, Japan, Canada
(parts of)
120V
VS7930A_NEW5.indd 6-7
VS7930A_NEW5.indd 6-7
10/17/08 12:51:11 PM
10/17/08 12:51:11 PM
