HYDRO SMOOTH STRAIGHT & CURL
12
OPERATING INSTRUCTIONS
Wash, condition & towel dry your hair so that it is damp or simply
straighten/curl on already clean & dry hair.
Ensure your hair is combed through & tangle-free.
1. Plug your styler into a suitable plug adapter (refer to chart) &
place on a heat protective, flat level surface.
2. Press & hold down the ( ) button for 1-2 seconds to turn your
styler on.
3. The LED indicator light will turn on & start to flash. At this point
your styler will start heating up.
4. Press the (
M
) button to adjust the temperature to your desired
heat setting - 160°C or 200°C. Once the temperature you have
selected has been reached, the LED indicator light will stop
flashing.
5.
TO STRAIGHTEN
Slide the STYLING switch to the STRAIGHTENING ( ) function.
a. Divide your hair into 4 sections (2 back & 2 front).
b. Starting with the back sections at the nape of the neck, take a
horizontal section no wider than the plate of the styler & clamp
the plates over the section then glide down slowly & evenly.
c. Repeat this through all sections.
6.
TO CURL
Slide the STYLING switch to the CURLING (
) function.
a. Divide your hair into equal sections & comb section once more
before curling each individual section.
