VS Sassoon Digital Sensor VSS500A, Instruction Booklet

Page: 11 / 20

11
DIGITAL SENSOR INTELLIGENT STRAIGHTENER
SENSOR PROTECT™ TECHNOLOGY
Select the Protect mode for enhanced heat protection. The
intelligent heat-control technology monitors & adjusts the plate
temperature to deliver salon straightening with care. There are two
ways in which to use the straightener; with or without the Protect
mode.
• After turning the straightener on, it will automatically set to 200°C.
Select a suitable temperature for your hair type by pressing the “+”
or “-” button.
• If the Protect mode is not activated the straightener will continue
to operate at the temperature selected.
• To use the straightener in Protect mode, first select a temperature,
then press the ‘Protect’ button.
• Once the protect mode has been activated the protect symbol will
appear within the LCD screen next to the temperature.
• The selected temperature will begin to flash registering that the
Protect mode has been activated.
• After a few passes through the hair the Sensor Protect™ Technology
will monitor & automatically adjust the temperature according to
your hair characteristics & will help to reduce the level of heat
transfer on to the hair during straightening.
• To return to normal operation, press the ‘Protect’ button to cancel
the Protect mode. The straightener will return to the original
temperature selected.
DELAYED-ACTIVATION CONTROL
Delayed-activation control gives consistent results & ease of use
whilst straightening. Immediately after switching on, adjust the
temperature & activate the ‘Protect’ setting. After 5 seconds of being
turned on, the switch will automatically lock. To adjust settings, hold
down the button of the required setting for 1-2 seconds, this will
deactivate the lock mode & allow the settings to be changed. To turn
off the straightener whilst in lock mode, hold down the button for 1-2
seconds until it switches off.