WARRANTY
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced.
if the goods fail to be of acceptable quality and the failure does not amount
to a major failure.
In New Zealand our goods come with a guarantee that cannot be excluded
under the Consumer Guarantee Act 1993.
Limited Two Year Warranty
Conair Australia Pty Ltd. will repair or replace (at our option) your appliance
free of charge for twenty-four months from the date of purchase if the
appliance is defective in workmanship or materials. This warranty is an
additional benefit and does not affect your legal rights. To obtain service
under this warranty, please read the Warranty Leaflet included or contact
Conair Customer Service at [email protected].
To make a warranty claim you must retain your proof of purchase.
THE ATTACHMENTS
Concentrator
Concentrator nozzles are designed to direct the airflow from your hair dryer
to just where you want it, to ease styling and straightening. Nozzles also help
you to direct the airflow along the length of the hair from roots to ends. This
is important because it helps to smooth the outer surface or cuticle of the hair
giving your hair style a smoother finish. For additional control try using one of
the lower speed settings with a higher heat.
Care should be taken not to direct the air flow directly onto the skin (e.g. the
scalp, neck, ears and face). Never rest the concentrator nozzle on the hair and
brush to hold it in place! You should always leave a 2cm to 3cm gap between the
end of the nozzle and the hair around the brush.
Diffuser
The volumising diffuser attachment is designed to build life and volume into
short to medium length hair, for drying any length of naturally curly hair and for
scrunch drying to build and enhance curl in wavy and loose curly hair.
The diffuser works by softening the air flow from the hairdryer and should always
be used on the lowest speed and heat setting to enable it to operate at its most
efficient. Cup the weight of your hair into the bowl of the diffuser and cup the
edges of the diffuser with your free hand to prevent your hair blowing around.
IONIC CONDITIONING TECHNOLOGY
Many aspects of modern living, including air conditioning, contact with man-
made fibers and air pollution add to the build-up of static electricity in your hair.
Even simply brushing and towel-drying your hair can increase these levels. This
static charge causes the scales, or cuticles of the hair, to push hair strands apart,
resulting in a rough hair surface.
Consequently, your hair may have a dull appearance. High levels of static charge
cause your hair to become ‘flyaway’ and difficult to style. The advanced internal
ionic generator conditions hair by emitting negative ions to reduce static, leaving
your hair silky and shiny with reduced frizz.
CERAMIC TOURMALINE TECHNOLOGY
Ceramic Tourmaline Technology will help keep your hair healthy and shiny
looking. It generates full spectrum, infrared heat which works on hair molecules
to dry them inside & out. It minimises heat damage and makes hair less frizzy
and more manageable.
Ceramic Tourmaline properties also help to reduce your hairs’ static electricity
by generating negatively charged ions, closing the hair cuticle & minimising
static electricity.Results are smooth, shiny hair with reduced frizzies & flyways.
USER MAINTENANCE
Blocked or clogged air intake vents will cause the dryer to overheat. The rear filter
should be checked and cleaned on a regular basis. To help maintain optimum
performance and prevent overheating of your hairdryer:
• Ensure that your styler is switched off, unplugged from the power outlet and
has cooled down.
• Holding the handle of your styler firmly, twist and pull the rear filter down to
remove.
• Using a soft brush, clean any hair and other debris that may build up in the
filter.
• Replace the rear filter by twisting and pushing back into position.
If overheating occurs, an automatic safety device will shut the dryer or the heat
off to prevent damage or personal injury. If the dryer or heat turns off, unplug the
cord and allow the dryer to cool for 15 minutes before restarting.
Make sure the air vents are 100% clean.
Vidal Sassoon and related logos are
trademarks of The Procter & Gamble
Company used under license by Conair
©2016 Conair Australia Pty Ltd
Suite 101, 18 Rodborough Rd
Frenchs Forest NSW, 2086
Australia
CUSTOMER SERVICE:
Australia: 1800 650 263
New Zealand: 0800 266 247
CONTACT US:
For advice, tips on your new VS product
E-mail us on: [email protected]
vssassoon.com.au
VSD270A
IMPORTANT SAFETY INSTRUCTIONS
The following safety precautions should always be followed when using
electrical appliances, especially when children are present in your household.
Please read these instructions carefully and keep for future reference.
DANGER
• WARNING: Do not use this appliance in or near bathtubs, showers,
basins or other vessels containing water. Keep the appliance dry.
• When this appliance is used in a bathroom, unplug it after use
since the proximity of water presents a hazard even when the hairdryer is
switched off.
• If this appliance falls into water, unplug it immediately - DO NOT reach
into the water.
WARNINGS:
Before and During Use
• Before using, always ensure that the voltage marked on the appliance is the
same as your local power voltage.
• If the appliance is designed to be connected to a detachable power supply
(otherwise known as a charger or adaptor), the appliance must only be
used with the power supply it was sold with.
• Do not operate this appliance or disconnect from the power supply with
wet hands.
• Never use this appliance at the same time as styling products such as
aerosols (spray).
• Be very careful when handling this appliance as parts of it may get
extremely hot.
• Do not place the appliance on any heat sensitive surface or near flammable
materials or objects.
• Keep the cord away from heated surfaces.
• Never block the air openings of the appliance or place on a soft surface
such as a bed or couch, where the air openings may be blocked. Keep the
air openings free of lint and other debris.
• Do not cover this appliance with anything when it is switched on or hot.
• To avoid electric shock, do not drop or insert any object into an opening in
this appliance.
WARNINGS:
for Storage and Maintenance
• Always unplug the appliance immediately after use and before cleaning or
maintenance.
• Do not leave the appliance unattended when plugged in or switched on.
• Always allow the appliance to cool down before storing away in a location
where children cannot reach it.
• Do not store or place this appliance in a location where it can fall or be
pulled into a bath or sink.
• Do not wrap the supply cord around this appliance when storing as over
time this may cause damage to the cord.
• If the supply cord is damaged it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
• Never operate this appliance if it has been dropped or damaged, or if it is
not working correctly.
• If this appliance is serviced by an unqualified person this could result in
an extremely hazardous situation for the user. Contact Conair Customer
service if you have any issues operating your styler.
CAUTION
• This appliance is not intended for use by infirm persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person - responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• Use this appliance only for its intended use and as described in this manual.
This appliance is not intended for commercial use.
• Do not use any attachments other than those supplied by Conair Australia
Pty Ltd.
• For additional protection, the installation of a residual current device (RCD)
with a rated operating current not exceeding 30mA is advisable in the
electrical current circuit supplying the bathroom.
Ask you installer for advice
