VRS Fleet Products CJV1 Pro HD, User Manual

Page: 13 / 24

Voice Announcement and LED 11
REC LED
GPS LED Security LED
▶ The function related to the product operation can be changed without prior notice in order to improve the performance of the product.
Recording LED : It shows the status of LED.
GPS: in non-receptive areas (basement garage, tunnel and highway) and extreme weather conditions can cause weak GPS signal.
Electromagnetic interference from other electronic devices inside vehicle or different types of vehicle can also create weak GPS signal.
F/W update: It is possible to upgrade firmware with copying it to the SD card and inserting the SD Card to the product
REC
Security Security
Alert
Audio-visual Alert
(Sound, LED flickering)
Power off the device can cause the
device malfunction while updating.
GPS
Firmware Update
SD card malfunction
or the product
malfunction
Active: On Non-active : Off Flickering
1
2
3
3
2
1
Operation
&function
Security
Voice
announcement
Note
Power On
Power On
System Check
Save Video and Power off
LED on/ off by GPS built-in
Cross flickering between
REC LED <-> GPS LED
(Auto reboot after format)
- Activation of Parking-Mode if the vehicle
is not moved for ten minutes
- Long Press Mode button or drive
away vehicle
Set: GPS LED Flickering once
Clear: GPS LED flickering twice
GPS Reception is activated after
flickering
Power On
Power Off Power Off
Alert Sound
Alert Sound
Alert Sound
Alert Sound
Flickering in order
Automatic or
Short press
Event button
Short press
Mode button
Long press Mode
button
(2 Sec. or more)
Long press Event
button
(4 Sec. or more)
Constant
Recording
Event
Button
Event
Recording
SD card
format
MUTE
Parking
Mode
(Motion)
Mode
Button
Recording
Mode
Device Booting
Announcement Messages
1.Please have a safe drive today.
2. You cannot use the current SD card.
Please replace the SD card.
3. We are starting the new upgrade.
4. The upgrade is complete.
Rebooting the system.
5. Formatting the SD card.
“Please have a
safe drive today.”
“Formatting
the SD card.”
“You cannot use
the current SD card.
Please replace
the SD card.”