9. Click “Next” till you see “Axis Calibration for Rudder.
(S3 slider is recognized as Rudder)
10. Move S3 slider up and down.
11. Click “Next” till you see “Axis Calibration for Throttle”.
(S4 slider is recognized as Throttle)
www.vrinsight.com
Tel : +82-31-284-7090~91 Fax : +82-31-284-7092
E-mail :
Web site :
www.vrinsight.com
14. Calibration is done. Go to “Test” and see if all controls are properly assigned for MS panel.
12. Move S4 slider up and down. 13. Click next and finish the calibration wizard.
4