BEFORE USE
Before use GPS-5, please check below procedures.
SerialFP2 Installation
In the GPS-5 package, one “Install DVD” is included. When you insert it in DVD
driver of your computer, “
VRinsight HTML”
document will be shown. Then click
“SerialFP2” (operating software) and install it at a proper folder.
“SerialFP2” is the main operating software of VRinsight used for all VRinsight flight
panels.
SerialFP2 software supports all functions of GPS-5 and completely interfaced with
MSFS9 and MSFSX enables full simulation with simple connection your computer
through USB.
Be sure that when installing SerialFP2, “Install USB-Serial Driver” must be checked.
After installation, you can find “SeiralFP2” in “All programs” of “Start menu”.
USB Connection
5
The connection between GPS-5 and your computer is made using a USB cable
that plugs into one USB port on your computer.
If you want to use a USB hub, be sure
that the USB hub is USB 2.0 compliant. Otherwise it may cause a malfunction.
When you connect GPS-5 to your computer at first, your computer will detect it and
will describe the process step by step.
Power Connection
Power supplying of GPS-5 panel is done by universal power supply adaptor DC
12V (Included in package).
Video Connection
The connection between GPS-5 and your computer is made using DVI or VGA
cable.
Run “SerialFP2”
When you confirm all setup processes done; “SerialFP2” installation, “USB
connection”, “Video Connect” and “Power connection”, you are ready to operate
GPS-5.
