INSTALLATION
1. Connect the USB cable of Flight Master Yoke to your computer.
2. Flight Master Yoke is recognized as a new Human-Interface Device (New Hardware)
CALIBRATION
NOTE
:
Since Flight Master Yoke is recognized as a joystick, it must be calibrated before use.
Calibration part is explained based on Windows VISTA.
1. Go to “Control panel” => “Game Controllers” and
check MS panel is recognized as an USB pad.
2. Click “Properties” => “Setting” => “Calibration”.
3. Run “Calibration Wizard” and click “Next” till you
see “Axis calibration”.
www.vrinsight.com
Tel : +82-31-284-7090~91 Fax : +82-31-284-7092
E-mail :
Web site :
www.vrinsight.com
2
4. Gently rotate the yoke from the left to the right several times.
