Belle +
Instruction Guide
1
Plug the mPERS charging cradle
into a power outlet. Make sure
that the outlet is
NOT
operated
by a light switch or a power strip.
A red light on the cradle will
light up.
2
Place the mPERS pendant into
the charging cradle. The red
battery light will flash as the unit
charges. The red light on the unit
will be solid when fully charged.
4
The Care Center will talk to you
through your unit. Let us know
you are a new client testing
your unit!
“No thank you.
I’m a new client
testing my unit.”
3
Once charged, put on your
pendant.
Press
and hold
your
help button until the blue call
light comes on. Your mPERS
unit is now calling the
Care Center.
Belle+ is a lightweight, two-way
communication pendant with a long lasting
battery that gives you up to 3-5 days of
coverage in one charge!
You’re going places. Take us with you.
If you have any questions or in need of
assistance, do not hesitate to call us
at
1-800-860-4230
.
Charging (on charging cradle)
Fully Charged (on charging cradle)
Charging (on charging cradle)
Fully Charged (on charging cradle)
After being removed from the
cradle for 3 minutes
Flashing 1 second - low battery
Flashing 2 seconds - charging
Fully Charged
Device is aquiring WiFi signal when
placing a call
Normal Operation
Normal Operation
Ba
tt
ery Light
W
iFi Light
GPS
Call Light
Flashing
Solid
Flashing
Off
Flashing
If light is solid for 5 seconds, then
off for 5 seconds call has failed
Failed
Device is acquiring signal when
activated
Flashing
After 5 minutes of being removed
from cradle will turn off (normal)
Off
Belle+
Light Guide
“This is the
Care Center. Do
you need help?”
Before you test your unit, make sure it is
completely charged
It is important to
test your device monthly
to ensure device is working properly
Fall detection is not a perfect science.
If you are able,
always
press your help
button in the case of an emergency.
!
