17
9.
Manual shunting and breakdown service
9.1.
Manual vehicle shunting
To shunt the vehicle with its own propulsion, sit on the vehicle and operate it as usual but with a reduced amount of
throttle grip.
Do not operate the vehicle via the throttle grip if not sitting on it.
To shunt by hand, deactivate the two parking brakes using the toggle lever, pulling the lever outwards. These are
located on the inside of each swing arm at engine level. Now the vR3 can be shunted by hand.
Activate the parking brakes again before riding. (Push the lever back inwards)
Push lever outwards to deactivate the parking brakes
Figure 10: Parking brake
Summary of Contents for vR3
Page 1: ...vR3 Operating instructions...
