X
To muffler
Filler tube
To engine
Rubber
stopper
Cap
Stopper
FUEL TANK INSTALLATION
Fuel tube
19- Fuel tank
After confirming the direction, Insert this assembly, clunk end first, into
the fuel tank and tighten and screw the fuel tank cap on firmly.
124 - 127mm
20- Electric motor
Firewall
A
A’
A=A’
SIDE-VIEW
B=B’’
TOP-VIEW
B
B’
Using a aluminum motor mounting plate as
a template, mark the plywood motor mounting
plate where the four holes are to be drilled (2).
Remove the aluminum motor mounting
plate and drill a 1/8”(3mm) hole through
the plywood at each of the four marks
marked .
CA
1
3mm
2
Note: The aluminum motor mounting included
with electric motor set.
3
4
2x10mm screw
21- Li-po
Battery box
