3-4
Preparing the VSU-2000 for Configuration
VSU-2000 User Guide
Preconfigure the VSU-2000 to communicate with the VPNmanager using the
Quick Setup menu selection as described below:
1.
From the Main Menu, select
5) Quick Setup.
You will be prompted for the information required to set up the VSU. To
accept the current value and go to the next prompt, press Return.
2.
Enter the IP address and netmask assigned to the VSU.
NOTE:
The Secondary IP address and mask are optional.
3.
Enter the default route for this VSU.
Typically, the default route is the IP address of the gateway router that
provides an IP route between the VSU-2000 and the public network (e.g.,
Internet).
VPNet Technologies - VSU XXXX- Main Menu
1) Configuration
2) Statistics
3) Utilities
4) Logout
5) Quick Setup
Your choice [1-5]: 5
IP address: 192.0.2.1 Mask: 255.255.255.0
IP address: 210.1.18.135
IP mask: 255.255.255.0
Do you want a secondary IP address on this unit? [yn] y
Secondary IP address: Secondary Mask: 255.0.0.0
Secondary IP address: 10.0.0.1
Secondary IP mask: 255.255.255.0
Default Route is not configured.
Enter Default Route: 210.1.18.1
Summary of Contents for VSU 2000
Page 1: ...VSU 2000 VPNware Service Unit User Guide VPNet Technologies Inc ...
Page 16: ...2 2 Installing the VSU 2000 VSU 2000 User Guide Figure 2 1 Installing the Rackmount Brackets ...
Page 20: ...2 6 Installing the VSU 2000 VSU 2000 User Guide ...
Page 34: ...VSU 2000 User Guide B 2 10 100BASE T UTP Crossover Cable Pinouts ...
