Important: Read Before Proceeding!
Read and follow the Safety Instructions below.
Save all packing materials. The Classic should only be moved or shipped in
its original packaging to reduce the risk of damage in transit.
The Classic Signature must be placed on a flat, level surface. This will make
setup easy, provide better sound quality, and put less strain on the main
bearing.
Safety Instructions
Follow the instructions below to reduce risk of electrical
hazard or injury.
1. To avoid electrical shock, do not open the motor cover.
2. If the power cord provided with the Classic Signature does not reach an
outlet, use a heavy-duty, grounded extension cord.
3. To avoid electrical shock, always plug the Classic Signature into a grounded
outlet.
4. Do not expose the Classic Signature to rain or excessive moisture.
5. Do not touch the male pivot point of the tonearm assembly. It is extremely
sharp.
Introduction
The Classic Signature turntable is a precision instrument. It has been thoroughly
tested and run for at least 4 hours. The speed accuracy, wow, flutter, and
rumble have been checked, and this unit meets all of our specifications.
Minimum Specifications
Wow and flutter
Less than .1%.
Rumble
Greater than 70db down.
Speed accuracy
Within .1%.
Platter run-out - +/- .001 inch in 39” circumference as measured on
the table
Pulley run-out – as measured less than +/-.0005
