1
Important: Read Before Proceeding!
Read and follow the Safety Instructions below.
Save all packing materials. The Classic 1 should only be moved or shipped in its
original packaging to reduce the risk of damage in transit.
The Classic 1 must be placed on a flat, level surface. This will make setup easy,
provide better sound quality, and put less strain on the main bearing.
Safety Instructions
Follow the instructions below to reduce risk of electrical
hazard or injury.
1. To avoid electrical shock, do not open the motor cover.
2. If the power cord provided with the Classic 1 does not reach an outlet, use a heavy-
duty, grounded extension cord.
3. To avoid electrical shock, always plug the Classic 1 into a grounded outlet.
4. Do not expose the Classic 1 to rain or excessive moisture.
5. Do not touch the male pivot point of the tonearm assembly. It is extremely sharp.
Introduction
The Classic 1 turntable is a precision instrument. It has been thoroughly tested and run for
at least 4 hours. The speed accuracy, wow, flutter, and rumble have been checked, and
this unit meets all of our specifications.
Minimum Specifications
Wow and flutter
Less than .02%.
Rumble
Greater than 80db down.
Speed accuracy
Within .1%.
Total weight
55 pounds.
Platter run out
+/- .001 inch.
Unpacking the Box
The turntable and tonearm are packed very carefully to avoid damage during shipping. It
is important that you save the packing materials and boxes to use for shipping or moving
the Classic 1.
Set aside the bag containing the drive belt.
