2
HOW TO SET UP YOUR TNT 5
The most important thing you can do for your new TNT 5 is to place it on
a level surface. It cannot be stressed enough that a level base for the TNT
will make set up much easier.
It is best to place the TNT 5 on a level surface that measures at least 32 x 2l
inches. This will allow room for the optional dust cover if you should want
to purchase it.
Open the box labeled PART B and removing the foam, you will find the Motor
Drive Unit or MDU. Be careful, this unit is heavy. Under the round foam
cutout is the platter. Remove it and place it and the MDU in a safe location.
In the box labeled PART A you will see the record clamp and below the foam
the main TNT-5 chassis with air suspension. This is very heavy so be careful
when lifting out the chassis. Place the chassis where it will be situated and
make sure you do not bang the rubber air suspension bladders.
AIR BLADDER
MINIMUM CLEARANCE
ROTATE TO LEVEL TABLE
1/8 INCH
