VPG VanWeigh, Installation, Setup And Calibration Manual

Page: 3 / 82

3
Important installation information and liability
waiver
VPG designs and manufactures on-board vehicle weighing equipment. These installation
guidelines are provided solely for the use of trained installers and represent the correct, safe and
recommended method of installation.
These guidelines must be followed fully to ensure proper, safe installation. Failure to do so may
result in serious consequences including, but not limited to, failure of the system to function
properly and damage to the weighing equipment that could jeopardize the stability and safety of
the vehicle.
VPG accepts no responsibility or liability for consequences arising from any improper installation
of the weighing equipment including but not limited to, any misapplication or misinterpretation of
the installation information contained herein.
Strict observance of these guidelines should help to ensure accurate weight measurement and
enable safe operation of the vehicle. Failure of our on-board vehicle weighing equipment due to
poor installation workmanship or incorrectly installed elements remains solely the responsibility of
the installer.
VPG does not accept responsibility for the structural integrity of the vehicle concerned, for any
part thereof, and for its proper, safe operation.
The company also reserves the right to make any amendments and alterations to this document
deemed necessary. You should ensure you have the current version of this information by
contacting VPG prior to performing installation, such as on our website at www.vpgsensors.com
VanWeigh
®
VanWeigh
®