VTAC USER MANUAL
VPC
10/10/2022
For more information visit vpc.com
12
RIGHT ANGLE RETENTION INSERT & HEADER FEATURE IDENTIFICATION
PART # 610 151 105, 610 151 104
Figure B.
Figure A.
RIGHT ANGLE RETENTION INSERT
1.
The top of the VTAC Retention Insert is located opposite of the PCB
mounting surface(
Figure A)
.
2.
The alignment posts and PCB mounting surface mate with the PCB
(
Figure A)
.
3.
The VTAC Retention Insert is fastened to the PCB via the mounting holes
(
Figure B),
using the two provided pan head Phillips screws.
NOTE:
The VTAC Retention Insert is not keyed.
PCB MOUNTING HOLES
TOP
ALIGNMENT POSTS
PCB MOUNTING
SURFACE
LATCH
RIGHT ANGLE HEADER
1.
The top is located opposite of the compliant pins (
Figure C
).
2.
The compliant pins and PCB alignment post, mate with the PCB
(
Figure C
).
3.
The front mates with the VTAC Pass-Thru Insert (
Figure D
).
4.
Each header contains 8 contacts. The location of pin position 1 is
identified below
(Figure D)
.
*NOTE:
The VTAC Right Angle Header can be mated to the VTAC Pass-Thru
Insert via two different orientations, which will change the location of pin
position 1.
Figure D. VTAC Right Angle Insert (side view).
PIN 1 (8)*
PIN 1 (8)*
PCB ALIGNMENT POST
PCB MOUNTING
SURFACE
TOP
Figure C. VTAC Right Angle Insert.
INSERTION TOOL SLOTS
COMPLIANT PINS
FRONT
MATING
SIDE
