29
S
ETTING THE
M
ONTEGO
II Q
UADZILLA AS THE
DEFAULT
MIDI
AND
A
UDIO DEVICE
If you have more than one sound card in your system you will need to set
the Montego II Quadzilla as the default MIDI and audio device.
S
ETTING THE
M
ONTEGO
II Q
UADZILLA TO BE THE
D
EFAULT
A
UDIO AND
MIDI D
EVICE
:
1.
From the Windows NT Control Panel double-click the Multimedia
icon.
2.
Click on the Audio tab. TBS Montego II Quadzilla Playback should be
chosen for Playback and TBS Montego II Quadzilla Record should be
chosen for Recording.
3.
Now click on the MIDI tab.
4.
The TBS Montego II Quadzilla MIDI should be selected.
5.
Click on OK to save any changes.
Note that you may need to be logged in as the Administrator
to make any system changes.
T
ROUBLESHOOTING
The Montego II Quadzilla PCI is assigned an IRQ by the BIOS. If you are
having an IRQ conflict, you will need to go into your BIOS setup to select
which IRQ is assigned to the slot in which you installed your Montego II
Quadzilla PCI. Please see your motherboard manufacturer’s
documentation.
T
O CHECK THE RESOURCE SETTINGS FOR YOUR
M
ONTEGO
II
Q
UADZILLA AND OTHER DEVICES
:
1.
Click on Start, then go to Programs -> Administrative Tools ->
Windows NT Diagnostics.
2.
Click on the resources tab. This will display a list of some of the
devices and resources that they use.
Summary of Contents for Montego II Quadzilla
