Pairing camera(s)
When you install an extra camera or if the monitor doesn’t detect it, please use this feature
to pair the camera with the monitor.
IMPORTANT:
Before pairing the camera, make sure camera power cord is well connected to a
constant 12-24V DC power source. Please refer to the With battery pack section and
follow the instruction in the Installing the Camera chapter to install the camera
properly.
Example: If you want to pair
a new camera to channel 3, please follow the steps below:
1.
Press
(MENU button) to choose the channel 3 in the Pair CAM function and
start the pairing process.
2.
System will count down within 60 seconds, system message as shown:
3.
Within 60-second count down, press the Link Key on the camera cable
