Unfold the Radius Pro E-Bike and lock
the latch in the center of the bike
frame. Make sure the connecting wires
are recessed into the pass-through
holes to ensure that the wires don’t get
pinched when locking the Frame in the
unfolded position.
Insert the handlebar stem into the recessed hole above the front wheel and lift
the handlebar up into the upright position before pressing down on the latch,
locking the handlebar in place.
Line up the handlebar and front wheel so that the front wheel is aligned with the
back wheel and the handlebar is perpendicular to the front wheel. Then unlatch
the handlebar and fold the handlebar down to reveal the locking bolt. Tighten
the locking bolt securely using the larger Allen key tool provided.
Next, lift the handle into the upright position and lock it in place by pressing down
on the lever until it snaps closed.
ASSEMBLY
7
2. CONNECTING THE HANDLEBARS
1. UNFOLDING THE BIKE
