Voyager DVR4100, User Manual

Page: 41 / 79

41
User can setup motion detection one by one or all at the same time
To select a cell: Mouse Left Click, / To deselect a cell: Mouse Right Click,
To select or deselect a block: Press Ctrl + Mouse Click
Blue area means selected /No color area means not selected
User can setup which camera to record in case of motion detection
Dwell time: 0 to 9 seconds
Email: disable or enable
Alarm out: if user wants send alarm out when motion detection, click on the 1 so it has a click
Popup: displays a selected camera when motion detection occurs
Sensitivity: 1 to 5
Press apply to validate your choice
Sensor
Sensor: 1 to 8
Enable : setup the status of the sensor OFF / HIGH
Record CH : select which camera to record in case of sensor trigger
Dwell time : define the length of the buzzer after each sensor trigger 0 ~ 9 seconds
Pop up priority
Email : disable or enable
Alarm out : in case of sensor trigger, DVR will send a signal via alarm out like a buzzer or
flashing red light
Popup : 1 ~ 4