3
C:
“
CAM
”
button: Switches between Camera 1 and Camera 2.
Camera 1
– Dedicated to the reverse circuit of the vehicle. The mode will
override the current video source when the Camera 1 trigger wire is triggered.
Camera 2 –
Dedicated to the turn signal circuit of the vehicle. This mode will
handle the turn signal pulse applied when the vehicles turn signals are activated.
D:
“
MAP
”
button:
Activates the Navigation screen and toggles between different map modes
for the navigation unit.
E: Inside Infra-RED Receiver for Navigation Remote Control.
F:
“
-
”
Button:
Incrementally Decreases the LCD Brightness.
G:
“
+
”
Button:
Incrementally Increases the LCD Brightness.
2. How to Turn the LCD Monitor On/Off:
a)
The monitor turns on every time the ignition key is turned on and system
power on.
b)
The monitor turns off every time the Ignition key is turned off and
the system power off.
3. How to view the Camera 1 rear observation image:
c)
The monitor will display the rear observation Camera 1 image whenever the
vehicle is shifted into the reverse gear. The rear observation Camera 1 image
returns to the previous source automatically any time the gear selector is
moved out of the reverse position.
d)
If you want to view the rear observation Camera 1 image at any other time,
press CAM Button to view the rear observation Camera 1 image