Voyage Audio Spatial Mic
User Guide
Controls
Knob
The anodized aluminum knob on the front of Spatial Mic indicates the front of the microphone
and is used to change various aspects of the recording and monitoring configuration.
●
Push
the knob to cycle through modes:
METERING
➜
MIC GAIN
➜
MIX
➜
HP LEVEL.
●
Rotate
the knob to adjust selected mode.
●
Push & Hold
knob to mute or unmute capsule signals.
Metering Mode
When powering up Spatial Mic for the first time, the LED display will show a turn-on sequence
and then default to metering mode showing individual capsule level. Default metering mode may
be changed with the
. The metering modes that may be selected are:
● Off
- no metering or LEDs on
●
Monitor
- LEDs display stereo L-R mix of Live binaural monitoring and host device
playback.
● Capsule
- LEDs display signal level for the 8 capsules. If audio from a capsule clips, it’s
corresponding LED will turn red for 3 seconds. This is an indication that you may need to
decrease capsule gain.
Mic Gain
Push the knob while in metering mode to enter Mic Gain mode as shown by the blue LED.
Current Mic Gain will now be displayed and can be adjusted by rotating the knob. Mic Gain
10
