11
Arming and Disarming
Close all doors and press ARM on remote
• All doors lock
transmitter.
• Siren chirps two times / parking lights flash
• Status indicator flashes steadily
Press Disarm on remote transmitter.
• All doors unlock
• Siren Chirps once / parking lights flash
• Status indicator turns off
Alarm Triggering / Starter Interrupt / Trip ID / Lock Options
Arm system. Wait 10 seconds, then
• Siren sounds / parking lights flash
open door.
With siren sounding, attempt to
• Vehicle will not start
start vehicle.
Wait until siren stops, then press DISARM
• Siren chirps / parking lights flash 4 times
on transmitter.
(System was triggered) (Y-11 only)
Press Override button.
• Siren chirps two times (System was triggered by door) (Y-11 only)
Close doors and attempt to start vehicle.
• Vehicle starts
• Doors lock (if Ignition Lock Option is activated) (Y-11 only)
Turn ignition off.
• Doors unlock (if Ignition Unlock Option is activated) (Y-11 only)
Panic
Press both buttons
• Siren sounds / parking lights flash for 30 seconds.
Passive Arming (Test only if Passive Option is activated)
Enter vehicle and close doors. Turn Ignition
• Alarm arms one minute after door is closed
on for 5 seconds, then, turn off.
Exit vehicle and close doors.
Valet
Enter Vehicle
With system disarmed, turn ignition on,
• Status Indicator emits a double-blink pattern. (Enters valet mode)
then press ARM.
Turn ignition off.
• Status Indicator will continue to emit double-blink pattern.
With system in valet mode, turn ignition on
• Status indicator turns off (Valet mode is exited)
then press DISARM
Testing the Alarm System
Antenna Placement
Keep the antenna as straight as possible, and route away from vehicle harnesses.
Summary of Contents for ELITE911
Page 12: ...12 ...
