Defaulting All Features:
Pressing the button anytime while in any of the feature
banks will default all features and return you to feature bank 2 -
4 chirps
.
NOTE:
The system will remain in feature programming mode as long as the ignition is
on, there is no time limit. To exit programming turn the IGNITION OFF.
Manual Feature Programming - Feature Bank 2, 3, 4, & 5
1.
Turn the ignition ON.
2. Press and hold the valet/override button.
3. Within 10 seconds the system will chirp (3) three times.
4. Use the valet/override button to advance through each option bank. For
feature programming advance to Feature Bank 2, 3, 4 or 5, which is (4)
four, (5) five, (6) six and (7) seven chirps.
5. Use the transmitter
button to scroll through the selections in each
feature bank, the system will chirp to match the feature number.
6. Press the transmitter button or the vehicle brake pedal to change the
desired feature. The LED will flash indicating the changed feature.
Set Up & Programming
Transmitter Programming - Feature Bank 1
1. Turn the ignition ON.
2.
Press and hold the valet/override button.
3. Within 10 seconds the system will chirp (3) three times.
4. Press 1 button of each transmitter you wish to program.
5. The system will respond with 1 chirp for each accepted transmitter.
6. Pressing the override button at anytime during programming will advance to
the next bank.
NOTE:
The system will exit transmitter programming after 15 seconds of inactivity.
NOTE:
This system has 1 button programming which programs all channels of the
system.
NOTE:
The system will hold up to 4 transmitters in memory, programming a 5th
transmitter will erase the oldest transmitter in memory.
NOTE:
This system has PTN - Programmed Transmitter Notification. Each time the
ignition is turned ON, the LED will flash the number of transmitters programmed to the
system.
Transmitter programming for 2 Car Mode *2 way LCD system only:
1.
Enter the transmitter into 2 Car Mode. (Refer to transmitter operation in the
owners manual for 2 car operation)
2.
Follow the steps above for transmitter programming.
NOTE:
2 car mode requires an additional security system installed in a second
vehicle.
Refer to transmitter programming.
Feature Bank 1 -
3 Chirps
Transmitter Programming
Feature Bank 2 -
4 Chirps
Security Control
1 LED Flash 2 LED Flash 3 LED Flash 4 LED Flash 5 LED Flash 6 LED Flash
1 Silent Choice
ON
OFF
2 Door Locks
Active
Passive
3 System Arming
Active
Passive
4 System Notifications
Siren & Horn
Siren Only
Horn Only
5 Alarm Duration
30 Seconds
60 Seconds
6 Security
ON
OFF
ON w/ OEM
Remote Start
7 Anti-Hijack Mode
OFF
ON
8 Ground While Armed
Orange ( - ) Output
Ground While
Armed
Ground While
Disarmed
9
DBI Port Protocol /
Telematic Port Protocol
DBI /
Voxx Telematic
ADS /
Voxx Telematic
DBI /
ADS Telematic
ADS /
ADS Telematic
10 Arm / Disarm Chirps
Standard:
2 - Arm
1 - Disarm
Inverted:
1 - Arm
2 - Disarm
11 LED Indicator
ON
OFF
12 Auto Re-lock
OFF
Lock Only
Arm & Lock
13 Extended Parking Lights
OFF
After Unlock
After Lock
After Lock &
Unlock
14 Parking Light Relay / Trunk ( - )
Output
Standard
Inverted
Feature Bank 3 -
5 Chirps
Output Control
1 LED Flash 2 LED Flash 3 LED Flash 4 LED Flash 5 LED Flash 6 LED Flash
1 Lock / Unlock Timing
1 Sec.
3.5 Sec.
1 Sec. Lock,
2x Unlock
30 Sec. Lock,
2x Unlock
2x Lock,
1 Sec. Unlock
0.5 Sec.
2 Factory Disarm 2
Blue / Green Output
Factory
Disarm
2nd Unlock
Factory Disarm
2x 500mS
Factory Disarm
350mS
Factory Disarm
500mS
Factory Disarm
w/ Unlock
Timing
3 Ignition Locks
OFF
Lock / Unlock Lock Only
Unlock Only
4 Trunk Output Timing
1 Sec.
10 Sec.
20 Sec.
Latched until
IGN ON
Latched ON
until Button
Press
5 Horn Output Timing
16mS
10mS
30mS
40mS
50mS
6 Real Panic
ON
OFF
7
AUX 1
Violet / Black Output
1 Sec.
Latched
Latched until
IGN ON
Dome Light
Output
Defrost Output
Single Pulse
After Start
Defrost Output
Latched 5 Min
After Start
8 AUX 2
White / Black Output
1 Sec.
Latched
Latched until
IGN ON
10 Sec.
w/ Arm
10 Sec.
w/ Disarm
9
AUX 3
Gray / Black Output
1 Sec.
Latched
Latched until
IGN ON
10 Sec.
w/ Arm
10 Sec.
w/ Disarm
10 AUX 4
Orange / Black Output
1 Sec.
Latched
Latched until
IGN ON
10 Sec.
w/ Arm
10 Sec.
w/ Disarm
11 AUX 5
Pink / Black Output
1 Sec.
Latched
Latched until
IGN ON
10 Sec.
w/ Arm
10 Sec.
w/ Disarm
Feature Bank 4 -
6 Chirps
Remote Start Control
1 LED Flash 2 LED Flash 3 LED Flash 4 LED Flash 5 LED Flash 6 LED Flash
1 RS Confirmation Chirp
ON
OFF
2 Run Time
15 Minutes
5 Minutes
10 Minutes
20 Minutes
45 Minutes
60 Minutes
3 Running Lights
Steady
Flashing
4 Tach Mode
Tach
Tachless
Hybrid
DBI Port
5 Voltage Level
High
Low
6 Crank Time
1.0 Seconds
0.8 Seconds
1.5 Seconds
2.0 Seconds
4.0 Seconds
7 Crank Output
Averaging
Preset Time
8 Diesel Delay
OFF
10 Sec. Delay 15 Sec. Delay 20 Sec. Delay 45 Sec. Delay
9 Remote Start Activation
2x Start
1x Start
10 Ignition 2 Output
Pink / White
Ignition
Accessory
Start / Crank
11 Auto Start Interval
3 Hour
2 Hour
12 Turbo Timer
OFF
1 Minute
3 Minute
5 Minute
13 Transmission Mode
Automatic
Manual
14 Temperature Start
OFF
14F
5F
-4F
15 Accessory Output
Orange
Accessory
Ignition
Start / Crank
16 Pulse Outputs with Unlock
OFF
IGN, ACCY,
GWR
IGN, ACCY,
GWR - Pulse
After Shutdown
17 RS Door Lock Control
OFF
Unlock before
Start, Lock
After Start
Unlock Before
Start
Lock After
Start
Lock After
Shutdown
Feature Bank 5 -
7 Chirps
Alternate Output Control
1 LED Flash 2 LED Flash 3 LED Flash 4 LED Flash 5 LED Flash 6 LED Flash
1 Factory Disarm
Lt Green / Black Output
Pulse Before
Start / During
Unlock
Ground While
Running
Ignition
Accessory
Pulse During
Crank
Pulse Before
Start / During
Unlock - Uses
Unlock Timing
2 Factory Arm
Lt Blue Output
Pulse After
Start / During
Lock
Ground While
Running
Ignition
Accessory
Pulse During
Crank
Pulse After
Start / During
Lock - Uses
Lock Timing
3 Pulse After Shutdown
Green / White Output
Pulse After
Shutdown
Ground While
Running
Ignition
Accessory
Pulse During
Crank
Pulse After
Shutdown 2
Sec. Delay
4 Pulse During Crank
Black / Yellow Output
Pulse During
Crank
Ground While
Running
Ignition
Accessory
Pulse Before
Start / During
Unlock
Pulse Before
Start / During
Unlock - Uses
Unlock Timing
PC Based Feature Programming / Firmware Updates
When using the NEW Code Alarm Utility App along with a VEPROG Programming tool you may program selectable features or update the firmware of this module. Refer to full
installation guide for additional detail.
1.
To download the Code Alarm Utility App visit the Voxx University website at voxxuniversity.com (registration/login required).
2.
Select VOXXTECH and locate the utility app under the heading Software Downloads.
3.
The Code Alarm Utility App download includes both the CA Utility app and necessary VEPROG drivers.
4.
Install both items before attempting to update modules.
Technical Support
(800) 421-3209
or visit
www.voxxuniversity.com
Feature Bank 2, Programming Update Notice:
Firmware version 3.0 or later.
Feature #9 has been updated to DBI Port Protocol & Telematic Port Protocol which
now includes a selection for the telematic port protocol. The new default setting of
DBI / ADS Telematic
is the correct protocol setting for the ASCL6 CarLink device.
