22
ca1155E rev B.
6 - Security:
Controls security functionality - ON / OFF.
ON -
Full security functionality.
OFF -
The security system does not trigger. Panic and all other convenience
features operate as normal.
ON w/OEM Remote Start Compatibility -
This will prevent a vehicle’s factory
remote start from triggering the security system when activated. The system
will use the ignition input to shunt shock and door inputs until 5 seconds after
they clear. If the alarm is triggered prior to ignition on, then ignition will not
shunt/cancel the alarm’s triggered state. Also, note that the ignition input will no
longer serve as a trigger if this option is selected on.
7 - Anti-Hijack Mode:
Controls Car Jack mode - ON / OFF.
OFF -
Standard security system operation.
ON -
Enables Car Jack mode functionality as described in the owners
manual
8 - Ground While Armed / Orange Output:
Controls the output of the orange wire.
This wire will either supply a ( - ) output when armed OR disarmed.
9 - DBI Port Protocol:
Determines the protocol type in which the DBI port uses to
interface with external modules.
DBI Protocol
ADS Protocol
10 - Arm/Disarm Chirps:
Determines the number of chirps and parking light flashes
when the system is armed/disarmed.
Standard -
2 chirps/light flashes with arm, 1 chirp/light flash with disarm.
Inverted -
1 chirp/light flash with arm, 2 chirps/light flashes with disarm.
11 - LED Indicator:
Control of the LED when the system is armed / locked.
ON -
LED will flash when system is armed / locked
OFF –
LED will not flash when system is armed / locked. Only applies to
normal operation (armed/locked) and does not affect programming, valet
mode, diagnostics, passive lock countdown or PTN