13
Insert the lifting rod
assembly (a) into the
faucet body group
connector (1), ensure
that the straight rod
has been installed to
the bottom and parallel
to the wall, draw a line
around the wall base
(3), remove the straight
rod, place the wall base
group base (3) at the
line drawing position,
and determine the
wall drilling position
according to the
installation hole on the
base.
After the elbow assembly is fixed, the shower
hose hexagonal connector is connected to
the body connector (9), and the hose conical
connector (8) is connected to the hand-held
shower.
Please note
that there should be rubber
gasket seals between the connectors.
Install
Range
LEVELRULER
Clamping point range of
level gauge
N joint plane
After the lifting rod assembly (a) and the body
group are installed in place,Adjust the height
and direction of use of the elbow (4) with a
hexagonTighten the screws (5) with a wrench
(6) and secure the cover(7) It is combined with
the wall base (3).
1
2
A
3
4
42
Koristite
svrdlo od
6mm prilikom
bušenja rupa
u zidu
9
10
8
5 6
7
EN
