Voxoa T40, User Manual

Page: 15 / 20

T
4
0
T40
15
ENGLISH
BEFORE USE
Line voltage selection
Just for dual voltage mode only!
Because power supplies vary from location to location we have
incorporated a selectable power supply.
The desired v oltage may be set with the VOLTAGE SELECTOR switch
located under the platter. (Use a fl at head screw driver).
Do not force the VOLTAGE SELECTOR switch as this may cause damage.
If the VOLTAGE SELECTOR switch does not move smoothly, please
contact a qualifi ed service technician.
Very important!!
Do not forget to attach rubber belt to motor for correct operation.
After placing the Turntable Platter onto the turntable through the Center pindle, move
one of the large windows on the Platter to top right corner. Attach rubber belt around
motor. (Rubber belt is already attached to the underside of the Turntable Platter.)
Connection
Before connecting the unit it is advised that you also consult
your current equipment instruction manual.
IMPORTANT: Be sure to turn off the equipment before you
make changes to the different connections.
1. Connect the power cord to an AC outlet.
2. Connect the RCA cable to the PHONO input of your Amplifi er
when you set the PHONO/ LINE switch to PHONO position.
You can also use a line input by setting the PHONO/ LINE
switch at the rear of the turntable.
Output terminals Amplifi er (Receiver)
L (White) L Channel
R (Red) R Channel
3. Connect PC via USB cord.
BJ-U2350EPD (V.0.1-011216).indd 章節2:15 BJ-U2350EPD (V.0.1-011216).indd 章節2:15 2016/1/14 上午 09:27:11 2016/1/14 上午 09:27:11