Remarks:
Please keep the NFC area of cell phone and headset within 1 centimeter
until the red and blue LED of headset flash alternately(First pairing time
maybe 3 seconds).
The headset will disconnect when the NFC area of cell phone and headset
touch each other again.
3) Pairing headset with multi devices via Bluetooth
The headset can connect with two Bluetooth cell phones at the same time.
The general pairing procedures are as follows:
1) Pairing the headset with device one
2) Turn on the headset and make it enter pairing mode again, and pairing it
with device two
3) Operate device one to connect with headset. The headset has already
connected with two devices in this moment
Remarks:
The multi-pair function is off in factory set, please turn on this function as
following:
Turn on:
long press
and + button under standby mode, and release it
until you hear four raise tone
Turn off:
long press
and
—
button under standby mode, and release
it until you hear four fall tone
To improve the stabilization of headset, we suggest you turn off the
multi-pair function when you only connect with one cell phone.
4. Making a call with the headset
1) Basic operation
Functions
Status of
headset
Operation
Prompt tone
Cancel a call
Calling
Short press
once
One
short
tone
Answer a call
Incoming
call
ringing
Short press
once
Two
raise
tone
6
