Vox Tonelab EX, Owner'S Manual

Page: 19 / 44

15
Saving a program
When you’ve come up with a sound you like, here’s how to
save (write) it.
NOTE:
If you switch to a different program or turn off the pow ‐
er before saving, the changes you’ve made will be dis ‐
carded, and the settings will revert to their original state.
1.
Press the WRITE switch.
The Bank/Value display and the program pedal LEDs will
blink.
2.
Press the BANK UP or BANK DOWN pedal to select a
bank (01 – 25) of the user program in which you want to
save your settings.
The selected bank number will blink on the Bank/Value
display.
3.
Press the Program 1–4 pedals to select the desired user
program.
NOTE:
Your settings will overwrite the program you select
here. Be careful not to overwrite an important pro ‐
gram that you want to keep. You can’t save to a pre ‐
set program (26–50).
HINT:
If you decide to cancel the Write operation, press the
EXIT/TUNE switch. You will return to the previous
mode, and the LED will stop blinking.
4.
Press the WRITE switch once again.
Your settings will be written to the user program you se ‐
lected in step 2, and the Bank/Value display and the pro ‐
gram pedal LED will return to a steadily lit state.
About the amp models, cabinet
models, and effect types
This section provides details about the amp models and stand
alone pedals and cabinet models, and on the pedal 1, 2 effects,
modulation effects, delay effects, and reverb effect.
The following illustration shows the signal flow within the
ToneLab EX.
11 STAND
ALONE PEDALS
MODEL
GAIN
33 AMPS
POWER AMP
(Valve Reactor)
VALVE ECC83
(12AX7)
VOLUME
PEDAL
1
PEDAL
2
MODULATION DELAY REVERB
VOLUME
PEDAL
CABINET
MODEL
AMP/LINE
switch
OUTPUT
AMPS/S.A PEDALS
Amp models
Here we’ll explain the 33 different amp models.
HINT:
Each amp model’s GAIN (adjusted by the top panel
GAIN control) can be assigned to the expression pedal
for control. For details on how to assign a parameter to
the expression pedal, refer to “Assigning a function to
the expression pedal (Quick Assign)” (p. 31).