4
Cancel
will be illuminated, and toasting begins. Once the bread has been toasted to the
preset color, the carriage handle will be automatically pop up.
Note:
The carriage handle can only be latched when the appliance connects to the power
supply.
5. During the toasted process, you may observe the toasting color. If it is satisfactory, you
may interrupt the toasting process by pressing the
Cancel
button at any time.
6. If the bread has been taken out from refrigerator. Set color control knob to your desired
color. Press carriage handle down vertically until it is positioned in place, then press
Defrost
button and the indicator of
Defrost
will be illuminated. In this mode it will be
toasted to your desired color.
7. If you want to reheat the cold toasted bread. Press carriage handle down vertically until
it is positioned in place, then press
Reheat
button and the indicator of
Reheat
will be
illuminated. In this mode toasting time is fixed, so long as time is running over, the car-
riage handle will automatically spring up and end up the reheating process.
CAUTION:
1. Remove all protective wrapping prior to toasting.
2. If toaster starts to smoke, Press
Cancel
to stop toasting immediately.
3. Avoid toasting the food with extremely runny ingredients such as butter.
4. Never attempt to remove bread jammed in the slots without unplugging the toaster from
the electrical outlet first, Be sure not to damage the internal mechanism or heating
elements when removing bread.
5. The bread slot is only applicable for toasting regular bread slice.
CLEANING AND MAINTENANCE:
1. Disconnect the power supply before cleaning.
2. Wipe the outside with soft dry cloth after toaster cools down, never use metal polish.
3. Pull out crumb tray on bottom of toaster and empty it. If toaster is used frequently,
accumulated bread crumbs should removed at least once a week. Make sure the crumb
tray is completely closed before using the toaster again.
4. When not use or storage, the power cord may be wound under the bottom of toaster.
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non-working
electrical equipments to an appropri-
ate waste disposal centre.
ENVIRONMENT FRIENDLY DISPOSAL
