Customer Support: 1.800.668.9318
Email: [email protected]
Web: www.nienkamper.com
VOX® POWER DRAWER
INSTALLATION GUIDE
Power chain orientation for standard cable and plug
power drawers.
Power chain orientation for hardwired power drawers.
Using 1/4-20” x 7/8” joiner bolts, mount assembled
drawer unit in place.
Caution- the drawer can slide open during installation.
Take care of this when handling.
For standard cable and plug installations, the power
chain is fixed to the bottom of the table with #8 x 5/8”
pan head, phillips drive wood screws.
Snap either hardwire or standard wire into first
link of power chain that has been mounted to
the drawer. Push cable into top of full length
of power chain. Snap length of chain into the
mounted starter link .
end mounts to drawer
end mounts to table
end mounts to table
note: additional bracket and
hardware will be added to this
assembly- see steps to follow
for details
end mounts to drawer
