Note: Voice dialing entries must be stored in the phone’s memory, not on the
SIM card!
1.
Press the
MFB (1)
for 1 second (1
st
beep) to make a voice dial. A voice dial
tone/ beep will be heard on the headset prompting the user to say the voice
tag of the contact to call.
2.
Say the voice tag. The voice will be played back to you, and then the phone
will dial the number automatically.
Redial:
-
Press the
MFB (1)
for 3 seconds (2
nd
beep). The last dialed number will be
redialed.
Audio Transfer
(For Handsfree Profile Phones only)
:
-
During an ongoing call, you can transfer the audio.
Headset to Phone:
Press and hold the
MFB (1)
for 3 seconds (2
nd
beep) and the audio will be transferred to the phone.
Phone to Headset:
Press the
MFB (1)
for 1 second (1
st
beep) and the
audio will be transferred to the headset
.
Note: For some phones, you may need to accept a connection prompt on the
phone before automatic transfer takes place.
Set the Volume:
-
Press the
Volume Up (3)
or
Down (4)
button repeatedly until the desired
level is reached.
F. SPECIAL FEATURE: VOX Activation / Deactivation:
-
When activated, the user can accept a call by saying any word within 10
seconds. The user can also reject a call by being silent for 10 seconds.
-
When deactivated, use the
MFB (1)
to answer a call.
The
Voice Answer Mode
can be enable or disable when the kit is in standby
mode (no ongoing call and close any multi media player).
Activation:
1.
From Connected and standby, press and hold the
Volume Up (3)
button for 5 seconds.
2. A beep will be heard. Then release.
Deactivation:
1.
From Connected and standby, press and hold the
Volume Down (4)
button for 5 seconds.
2. A beep will be heard. Then release.
4
