4
REAR PANEL LAYOUT
1
2
3
1.
MAINS INPUT
Connect your supplied mains power lead here
NOTE:
Use only the power cable that is included with the AC4C1-MINI. Using
another power cable may cause malfunctions.
The specific mains input voltage rating that your amplifier needs to run
at is located on the rear panel of your amplifier. Before making any
connections or powering up the amplifier, make sure the correct volt-
age is set. If you have any doubt, refer to your local VOX dealer.
2.
HEADPHONS/LINE OUT Jack
Connect you favourite stereo headphones here, or connect directly to
your favourite recording rig. The output from this jack passes through
a cabinet simulator. So you can enjoy authentic tube amp tone
through your headphones!
3.
SPEAKER/HEADPHONES switch
Select output from either speaker or headphones.
NOTE:
Please ensure that the switch on the rear of the amplifier is set to your
desired output otherwise no sound will be heard.
SPECIFICATION
• Controls:
Gain, Bass, Treble, Volume
• Input:
Guitar In
• Output:
HEADPHONS/LINE OUT
• Tube compliment
2 x 12AX7, 1 x EL84
• Output Power:
4 W RMS (16
Ω
)
• Speaker:
VOX Custom 1 x 6.5" (16
Ω
)
• Dimensions (W x D x H):
348 x 189 x 292 mm /13.7 x 7.44 x 11.5 inches
•
Weight:
6.4 kg / 14.11lbs.
• Accessory:
Power Cable, Manual
*Specifications and appearance are subject to change without notice for improvement.
