VOX electronics WK-1009A, Operating Instructions Manual

Page: 5 / 69

8.
When the water has boiled, the kettle
will switch off automatically, after al-
lowing the kettle to cool down for 15-20
seconds, the water can be brought back
to the boil by pushing the switch back to
the “on” position. During the cooling
down time do not force the on/off switch
into the “on” position as this can dam-
age the operating mechanism.
9. Do not remove the kettle from the power
base without switching off first.
10. Remember, if you do not wish to re-boil
the kettle, switch it off.
11. The kettle may be switched off
manually at any time by setting the
on/off switch into the “off” position.
Cleaning and care
Proper and regular care will not only ensure safe use but also elongate the lifetime of
this appliance.
Warning! Switch of the appliance and disconnect from power
supply before you carry out cleaning and maintenance work to
avoid electrical hazard.
1. Let the product cool down.
2. Wipe dust off with a soft dry cloth or soft brush.
3. To clean other debris you may use a slightly wet cloth and neutral detergent.
4. Never immerse electric parts of the appliance in water or other liquids and do not
clean the appliance in the dishwasher.
Note! Do not use chemical, alkaline, abrasive or other aggressive detergents or
disinfector to clean this appliance as these might be harmful to its surface.
Descaling
From time to time, depended on the nature of your water supply, a boiled scale
deposit is naturally formed and can be found mostly adhered to the heating
element, thus reducing the heating efficiency.
The amount of boiled scale deposited (and subsequently the need to clean or
rescale) largely depends on the water hardness in your area the frequency with
which the kettle is used. Boiled scale is not harmful to your health. But if poured into
your beverage, it can give a powdery taste to your drink. Therefore, the kettle should
be descaled periodically as indicated below.
Descale kettle regularly. With normal use: at least twice a year
1. Fill the kettle up to “max” with a mixture of one part ordinary vinegar and two
parts water. Switch on and wait for the appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Discard the mixture the next morning.
4. Fill the kettle with clean water up to “max” mark and boil again.
5. Discard the boiled water to remove any remaining scale and vinegar.
6. Rinse the inside of the kettle with clean water.