VOX electronics TM-1056, Operating Instructions Manual

Page: 6 / 95

5
onto the jar base bottom and secure the blade assembly by turning it anti-clockwise until tight
（
See
Fig.3
）
2) Reposition the jar assembly with its opening upwards. Wrap the seal ring 1 around the lid bottom
and put the lid onto the jar assembly. Place the measure cup exactly into the lid by fitting the small
projection on the both sides of the cup into the slots of the lid and turning the cup clockwise until tight.
（
See Fig.4
）
3) Finally, place the assembled jar onto the motor unit by aligning the strip on the assembled jar
bottom. (See Fig.5
）
CAUSION: Jar and jar base is now secure. Do not try to twist the jar and jar base onto motor unit
How to use
1. Peeled or cored the fruit or vegetables and then cut it into small dices.
2. Place the food to be blended into the jar
（
See Fig.6
）
. Usually, certain amount of purified water has
to be added to facilitate the smooth running of appliance. The proportion of the food and water is
2:3.The amount of mixture should not exceed the max level as indicated on the jar.
3. WARNING: When attempting to blend hard fruit or hard vegetables, cut into small pieces before
blending. Ensure that the dial is set to the highest Speed (Speed 6) before commencing. If the
speed is set too low, the motor will get damaged due to insufficient torque (high speed rotation).
When the motor speed is too slow for the product that it is attempting to blend, set it to a higher
speed in order to increase the rotation speed or switch the unit off to prevent motor damage.
RECIPE
FOOD TYPE SPEC WEIGHT SPEED
Carrot (apple, pear
etc)
Cut into 15mm*15mm*15mmm
Carrot: 600g
Water: 900g
High speed
Fig.3
1