VOX electronics LC-12A15, Operating Instructions Manual

Page: 15 / 204

EN - 10
4 .3. Test Strip
Run water
through the
tap (1min.)
Keep the
strip in the
water (1sec)
Shake the
strip.
Wait
(1min.)
Set the hardness level of
your machine.
1
2
3
4
5
6
NOTE: The level is set to 3 as default. If the water is well water or has a hardness level
above 90 dF, we recommend that you use filter and refinement devices.
4 .4. Water Hardness Table
Level German dH
French
dF
British
dE
Indicator
1 0-5 0-9 0-6 Wash LED is on.
2 6-11 10-20 7-14 Dry LED is on.
3 12-17 21-30 15-21 End button is on.
4 18-22 31-40 22-28 Wash and Dry LEDs are on.
5 23-34 41-60 29-42 Wash and End LEDs are on.
6 35-50 61-90 43-63
Dry and End LEDs
are on.
4 .5. Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your water
company or use the test strip (if available).
4 .6. Setting
• Turn on the machine by pressing On/Off button.
• Press Up button at least for 3” immediately after machine is turned on.
• Release Up button when all leds blink once. The last setting level is viewed.
• Press Up or Down button to increase or decrease the hardness level respectively.
• Turn off the machine to save the setting.
4 .7. Detergent usage
Only use detergents specifically designed for domestic dishwashers.
Add the recommended amount of detergent for the selected programme to ensure the best
performance.
Keep your detergents in cool, dry places out of reach of children.
See the detergent manufacturer’s instructions for a further information.