![VOX electronics GF201F Operating Instructions Manual Download Page 12](http://html1.mh-extra.com/html/vox-electronics/gf201f/gf201f_operating-instructions-manual_1051723012.webp)
2.5 Energy saving tips
•
The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
•
Let hot foods cool to room temperature before placing in the appliance. Overloading the
appliance forces the compressor to run longer. Foods that freeze too slowly may lose
quality, orspoil.
•
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.
This cuts down on frost build-up inside the appliance.
•
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the appliance less efficient.
•
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
2.4 Start to use
•
The freezer shall stay for half an hour before connecting power when
it is firstly started.
•
The freezer shall run 2 to 3 hours before loading fresh or frozen
foods; the freezer shall run for more than 4 hours in summer in
advance considering that the ambient temperature is high.
2.3 Placement
• Before using tfie freezer, remove
ail packaging materials
including bottom cushions
and foam pads and tapes
inside the freezer, tear off the
protective film on the door
and the freezer hody.
• Keep away from heat and avoid
direct sunlight. Do not place
the freezer in moist or watery
places to prevent rust or
reduction of insulating effect.
• The freezer should be placed in a
well-ventilated indoor place; the
ground shall be flat, and sturdy .
• The top space of the freezer shall
be greaterthan 70cm, and the
distances from both sides and
backside shall be more than
20cm
to
facilitate
heat
dissipation.
9
3 Maintenance of freezer
3.1 Cleaning
• Dusts behind the freezer and on the ground shall be timely cleaned to improve the cooling effect and energy
saving.
• Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth
dampened with soapy water or diluted detergent.
• The interior of the freezer should be cleaned regularly to avoid odor.
• Please turn off the power before cleaning, remove all food, basket, container, etc.
• Use a soft cloth or sponge to clean the inside of the freezer, with two tablespoons of baking soda and a quart of
warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry naturally before
turning on the power.
• For areas that are difficult to clean in the freezer (such as gaps or corners), it is recommended to wipe them
regularly with a soft rag, soft brush, etc. and when necessary, combined with some auxiliary tools (such as thin
sticks) to ensure no contaminants or bacterial accumulation in these areas.
·
·
Summary of Contents for GF201F
