VOX electronics EBI 200 DB, Operating Instructions Manual

Page: 12 / 129

EN - 11
Line
you
marked
Gasket
•
Insert the appliance into the aperture
and fix in position using the brackets (A)
and screws (B). Adjust the position of
the brackets depending on the thickness
of the worktop and tighten the screws
evenly. Carefully trim away any excess
sealing material (C) from around the
appliance.
Hob
Hob
C
C
A
A
t<25 mm
t>25 mm
B B
2.3. Electrical Connection and Safety
WARNING:
The electrical connection
of this appliance should be carried out
by an authorised service person or
qualified electrician, according to the
instructions in this guide and in compliance
with the current local regulations.
WARNING: THE APPLIANCE MUST
BE EARTHED.
•
Before connecting the appliance to the
power supply, the voltage rating of the
appliance (stamped on the appliance
identification plate) must be checked for
correspondence to the available mains
supply voltage, and the mains electric
wiring should be capable of handling the
appliance’s power rating (also indicated
on the identification plate).
•
During installation, please ensure
that isolated cables are used. An
incorrect connection could damage
your appliance. If the mains cable is
damaged and needs to be replaced this
should be done by a qualified person.
•
Do not use adaptors, multiple sockets
and/or extension leads.
•
The supply cord should be kept away
from hot parts of the appliance and must
not be bent or compressed. Otherwise
the cord may be damaged, causing a
short circuit.
•
If the appliance is not connected to the
mains with a plug, a multi-pole isolator
switch (with at least 3 mm contact
spacing) must be used in order to meet
the safety regulations.
•
The fused switch must be easily
accessible once the appliance has been
installed.
•
Ensure all connections are adequately
tightened.
•
Fix the supply cable in the cable clamp
and then close the cover.
•
The terminal box connection is placed
on the terminal box.
PE
Brown
Blue
Green