Main components
1. Ignition nozzle for charcoal and briquettes
10. Cord clip
2. Flat nozzle
11. Hanger
3. Scraper nozzle
12. Weed nozzle
4. Concentration nozzl
13. Hot air nozzle
5. Separate handle
14. Temperature selector
6. Shaft
15. Handle
7. Cord and plug
16. Shaft thread
8. On/off button
17. Cord holder
9. Button for angling handle
Assembly as a weed burner
Screw the shaft (6) to the motor section’s thread (16). Screw the separate handle (5) to the
other end of the shaft (6).
Secure the cord (7) to the shaft (6) using the cord clips (10).
Press and hold the button (9) and turn the handle (15) so that the hot air nozzle (14) extends out
of the handle (15).
Attach the weed nozzle (12) to the hot air nozzle (13).
If you want to use the weed burner as a heat gun, remove the shaft and the separate handle
and turn the handle so that the hot air nozzle is angled correctly in relation to the handle.
Choose the nozzle suitable for the task in hand.
