- 2 -
Initial Start-up
The Voltmeter is ready for operation, as soon as all electric connections are made and the voltage of the board battery is
available at the corresponding terminal.
Basic Setting:
The existing system voltage (12 V or 24 V) must be set.
Operation LCD Voltmeter S
Key 1: Changing the Volt displays,
Key 2: Display on/off.
Menu (3s)
Activation, Deactivation
The unit is optimized for extremely current saving operation and offers three operation modes.
Stand-by:
During stand-by mode the display is empty.
Display with and without illumination:
As soon as the voltmeter is operated, the display illumination will be switched-on
and will remain activated for 3 minutes. If there is no operation during this time, the illumination will be switched-off
automatically. The display continues showing the same data. The display illumination is reactivated by pressing any key.
The proper function of the key will be effected by pressing the key a second time.
Voltage Displays
Use the key 1 to scroll between the voltage displays starter and board battery.
Voltage:
The voltage of the battery will be displayed.
The markings at the lower edge of the display point to the corresponding battery.
