Distributed by Votex GmbH Printed in Germany by Votex GmbH
5
A
3
5
4
6
7
6
10
2
9
A
●
The pressure at the upper support -A- is adjusted by turning
the lower support -9-.
- Turn the lower support -9- in or out until the upper support -A-
lies tightly against the roof cross member.
- Turn the star grip nut -2- against the separating grip.
- Tighten all star grip bolts and nuts.
Notes:
●
Secure heavy load additionally with tensioning belts.
●
The separating grid must only be used in connection with head restraints
inserted in the rear seat back of a seat and locked back of a seat.
●
Check all threaded joints after a brief drive and retighten, if necessary.
●
Check threaded joints regularly.
Warning:
It is not allowed to transport persons behind the separating grid.
- Fit the star grip bolt -10- on the separating grid -1- with plain
washer -6-.
- Fold the retaining eye -A- upwards.
- Place the retainer support -3- on the retaining eye -A-.
- Pass the coach bolt (M8 x 20) -4- through the counterplate -
5-, the retaining eye -A- and the support -3-.
- Fit the star grip nut -7- on the coach bolt (M8 x 20) -4- with
washer -6-.
