. Overview
UT-6405 is a 5-port 100M non-managed ethernet switch with reverse
polarity protection of DC input for avoiding being damaged. It has in geniou s
appearance design and supports industrial standard DIN-Rail and wall-
mounted installation, so it's very easy to be installed and used in any industrial
networks.
.
Main Features
. Indication Light
a. PWR: DC
power supply
connected as shown in figure 1 and the power indication light
PWR will light, the switch operates normally.
B. RJ-45: After network cable is connected the left green light
will light for 100Base network and not light for 10Base network
The right yellow indication light is network link indication light and
it will light when the network cable is connected and switch operates
normally. Both yellow and green lights will not light if the network
cable is not connected.
12/24/48VDC(10.8~52.8VDC)
1
2
3
.
Power supply connection
UT-6405 Ethernet switch supports DC
power supply inputs, and the model equips
with reverse polarity protection for avoiding being damaged.
1. Connect the positive/negative polarity to V+ and V- terminals
respectively
2. Tighten the screws to avoid loose connection and bad contact.
12/24/48VDC(10.8~52.8VDC)
Figure 1 Power supply input terminal
2 3
1
V +
V
.
Dimension
.
Installation
1. DIN-Rail
Push the top of the device rail to fixed rail.
Then push it into the rail slightly again
2. Wall-mounted
Tighten the metal fixation strip with accompanied screws as
shown in the above figure.
Then hang the machine with locked metal strip onto wall or
machine cabinet.
UT-6405
5-Port 100M Unmanaged Ethernet Switch
User Manual
Standard:
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
Interface:
RJ45 port:5 10/100Base-T(X) ports, auto detection,
full/half-duplex, auto MDI/MDI-X
LED indication:
PWR indicator and RJ-45 indicators for port 1-5
Power Supply:
Input Voltage
12/24/48VDC(10.8~52.8VDC)
Power consumption: 120mA@24Vmax
One pluggable 3-pin terminal block
Overload protection: Yes
Polarity protection: Yes
Mechanical Property:
Enclosure:IP40
Method of installation:
Dimension (W
H
D):150 mm
37mm
100mm
Working Environment:
Working temperature: -20
~ 75
Storage temperature: -40
~ 85
Relative humidity: 0% ~ 95% (no condensation)
Industry Standard:
EMI
FCC Part 15 Subpart B classA
EN55022 class A
EMS
IEC(EN)61000-4-2(ESD)
IEC(EN)61000-4-3(RS)
IEC(EN)61000-4-4(EFT)
IEC(EN)61000-4-5(Surge)
IEC(EN)61000-4-6(CS)
IEC(EN)61000-4-8
IEC 60068-2-27(Shock)
IEC 60068-2-32(Freefall)
IEC 60068-2-6(Vibration)
DIN-Rail/wall-mounted
150mm
5.90in
1
0
0
m
m
3
.9
3
in
37mm
1.45in
37mm
1.45in
3
7
m
m
1
.4
5
in
150mm
5.90in
3
7
m
m
1
.4
5
in
150mm
5.90in
