Vostok VOSPAC10KWA, User Manual

Page: 28 / 36

28
Timer Operation
Timer ON:
•
When the air-conditioner is in standby, press the “TIMER” button and select a desired-
ON time through the temperature and time setting buttons.
•
“Preset ON Time” is displayed on the operation panel.
•
ON time can be set at any time in 0-24 hours.
Timer OFF:
•
When the air-conditioner ON, press “TIMER” button and select a desired OFF time
through the temperature and time setting buttons.
•
“Preset OFF Time” is displayed on the operation panel.
•
OFF time can be set at any time in 0-24 hours.
Sleep Mode
•
While in cooling mode, press the SLEEP button to set the temperature. It increases 1°C
after an hour and at most increases 2°C after 2 hours.
•
While in heating mode, press the SLEEP key to set the temperature. It decreases 1°C
after an hour and at most decreases 2°C after 2 hours.
•
Press the SLEEP key again can cancel the setting.
Water Drainage
Water Full Alarm:
The inner water tray in the air-conditioner features a water level safety switche, it controls
the water level. When water level reaches an anticipated height, the water full indicator
lights up. When the water is full, attach the supplied drainage hose to the water outlet
please remove the rubber blockage from the drainage outlet at the bottom of unit and drain
all water outside.
Continuous Drainage:
•
When you plan to leave this unit unused for a long time, please remove the rubber plug
from the drainage hole at the bottom of unit and drain all water outside.
•
When the unit is in HEAT mode (only for Reverse Cycle units) you can use the
continuous drainage method by attaching the supplied drainage hose to the drainage
outlet and direct the to a drain hole.