background image

 

2

 

2. Drive a two-wheel intelligent drifting scooter 

Using intelligent drifting scooter security related matters need attention, so you must fully 

understand the instruction manual before driving, all of the matters needing attention, to 

understand these security issues is very important for you. 

 

2.1 Intelligent drifting scooter steps 

Step 1. Start the smart drifting scooter, press the power switch. 

Step 2. Driving to the trigger switch operation indicator light on single foot mat, automatic 

balancing system into the state, maintain smooth fuselage on the other foot after can 

operate. 

Step 3. Manipulation of the drifting scooters after successful standing balance of the 

center of gravity, intelligent drifting scooter mobile will remain stationary state. Small 

forward or backward through the body to control the smart drifting scooter forward or 

backward, remember that the body movement range is too big. 

Note: 

   

If the trigger when the foot switch intelligent platform 

drifting scooter not in level state, the beep will alarm and alarm 

indicator light, system into automatic balance state, at this 

time are prohibited. 

Step 4. Manipulation of the drifting scooter left and right. 

Step 5. Get off the bus, get off before you stop intelligent drifting scooter balance state, 

one foot down, the other one foot in the left drifting scooter again. 

 

Summary of Contents for SBS020601










Reviews: