Vosonic VP2160, Manual, Page: 12 / 17

X’s-Drive II
+
VP2160
12
1) To charge the batteries, please connect the plug of the AC adapter to DC 5V jack of
the main unit. When the Power LED indicator goes off, it indicates that the batteries are fully
charged.
2) Please use only the FUJIFILM NP-60 1100mA 3.7V rechargeable Li-ion battery.
3) For additional battery packs, please contact your dealer or you can purchase it
at Digital Camera Stores.
10 If an erroneous display /operation occurs :
_________________________________________________________________
1) When the device error message pop on screen , there may be a chance of
corrupt data or the memory card is damaged , you can change another
memory card .
2) If any shut down caused by erroneous operation , you can depress the [reset]
button located on the left to switch off the main unit .
3) If the unit operated via USB on to PC while the batteries are low, erroneous
display /operation may occur, if this happens ,unplug the USB cable, and press
the [reset] button .
11. Care for the Hard Drive and unit :
_________________________________________________________________
1) If the computer or VP2160 can not detect the Hard Drive, check the suggested solutions:
y
Check the flat connector is plugged securely or not
y
Driver is not install -then reinstall
y
It is not recommended to format the 32G above Hard Disk under Windows 2000
or Windows XP
Note: Win 2K/ Win XP can not support Format Disk for 30G above Hard Drive.
2) Please don't use force when connecting the flat cable with the unit and
Hard Drive .
3) To keep your hard drive in better operating performance, we recommend to
periodically run Scan Disk and Disk Defragmenter .
4) Hard Drive must be formatted to the FAT or FAT-32 format, NTFS format is not
compatible with this function .
5) Please carefully insert and remove the memory card from each slot .