Vorwerk KOBOLD VF200, Instruction Manual, Page: 31 / 109

31 Operation
MANUALLY SWITCHING BETWEEN HARD FLOOR/CARPET MODE
You can also set the floor mode manually using the function key on the
handle of the Vacuum System.
• Select the correct power performance level for your floor according to
“Table 3.1 Settings for the floor types” on page 33.
• Press the function key on the main switch of the Vacuum System to switch
between hard floor mode and carpet mode.
The power light (Fig. 3.3) flashes when the mode is manually set.
REACTIVATING INTELLIGENT FLOOR DETECTION
When you manually change the operating mode, intelligent floor detection is
deactivated.
• Reactivate the automatic function by switching the Vacuum System off and
back on again.
3.1.2 Floor cleaning
Caution! Risk of injury from debris flying out!
• Avoid abruptly placing the device on loose, coarse debris (e.g. glass
shards), especially at eye level.
• Switch off the Kobold EB400 Automatic Electric Brush before lifting it
up.
Note! Risk of damage from improper use!
• Avoid working with the device in one specific spot for a prolonged period
of time.
• Avoid vacuuming loose carpets/fringes.
Fig. 3.4 Manually switching between
hard floor/carpet mode
1