Vorwerk kobold vc100, User Manual

Page: 28 / 92

28
Removing the batteries from the device
1. Remove the handheld vacuum cleaner from the charging unit.
2. Let the handheld vacuum cleaner run until it comes to a
complete stop and cannot be switched on again.
3. Open the handheld vacuum cleaner and remove the cover.
4. Remove the four screws.
5. Remove the motor block with the batteries.
6. Disconnect each connecting wire individually and take out the
batteries.
10 Warranty
Any warranty services can be found in the order note or purchase
contract.
11 Service
Either in person with your customer representative or at the
Customer Services.
www.vorwerk.co.uk
12 Technical data
Kobold VC100 Handheld Vacuum Cleaner
Safety symbols
Housing High-quality, recyclable, thermoformed plastic
Motor Maintenance-free DC motor, approx. 23,000 rpm
Input voltage mains charger 220 – 240 volts alternating current 50/60 Hertz
Output voltage mains charger 10.8 V DC
Mains charger type British integrated plug: S006BAB1080050
European integrated plug: S006BAV1080050
Nominal output of the motor approx. 65 watts
Maximum suction power 13 watts
Maximum volume flow 15 l/s
Weight 650 g (without charging unit and mains charger)
Dimensions Length (with wall mount): 425 mm
Length (vacuum cleaner): 417 mm
Diameter: 82 mm
Noise emission 75 dBA (measured under free-field conditions on workbench)
Battery pack Lithium ion