38
ENGLISH
Control panel - menù upload and download software
(fig. 22-23)
Keypress
It allows you to enter in / out menu that will allow you to view the physical quantities measured
and generated by the instrument
You can use the Hot Key 64:
-Copy the parameter map from the Hot Key 64 the instrument (Download)
-Copy the map by the instrument parameters the Hot Key 64 (upload)
Download from 64 Hot Ket to instrument:
to do this it is necessary that the unit is in STD-BY otherwise the display will show:
"Download enabled only in stand-by".
Procedure to perform the download:
Insert the Hot Key 64 in the 5-way connector through the hole in the back of the instrument
•
Choose "Download from a HotKey tool"
•
press ENTER to perform the operation if the operation was successful will displayed "OK", if it was not
•
successful It will display "ERR"
Upload from instrument to Hot Key 64:
Procedure to perform an upload:
Insert the Hot Key 64 in the 5-way connector through the hole in the upper part of the instrument
•
Choose "Upload from instrument to HotKey"
•
Press ENTER to perform the operation (if done correctly will give "OK", if not carried out correctly, "ERR"
•
The causes that can lead to failure of the operation to upload or download can be:
Hot Key 64 not properly inserted into the connector
•
Use of a Hot Key model different from Hot Key 64
•
Press the home button
to return to the installer menu.
HOTKEY
Fig. 22 Display upload and download tool software
Fig. 23 Inserting USB key