Vortice NORDIK AIR DESIGN 140-17, Instruction Booklet

Page: 8 / 48

• Do not use the appliance at an ambient temperature above 40 °C (104 °F).
• Position the appliance at a safe distance from walls, fixtures and furniture, etc.
• The specifications of the power supply must match those indicated on the data plate A (Fig.2).
•
The appliance must be wired to the power supply by way of a multi-pole
isolating switch with a gap of at least 3mm between contacts. 3.
•
The appliance must be installed by a professionally qualified
technician.
Installation
Fig: 3 ÷ 36.
• Check that the ceiling is structurally sound and strong enough to take the weight of the appliance.
• Take care that the fixing hardware does not impair the structural strength of the ceiling.
• Make certain that the fastening components used are securely tightened, able to take the weight of the
appliance, suitable for the ceiling, and of a type that will not be loosened by the rotation of the fan.
Use
All functions of the appliance can be operated using the remote control provided;
this controls 6 sets of options, each set associated with a Led at the top end of the handset (fig. 37:
1. Fan (air directed downwards)
2. Fan in reverse (air directed upwards)
3. Off timer
4. "Room" light
5. "Dark" light
6. Mixed light
The sets of options can be selected in sequence pressing “+” and “-” on the remote control.
Details of the different sets of options are described below:
1. Fan: available functions:
2. Fan in reverse: see above
3. Off timer:
4. Room lightning:
8
ENGLISH
- e
:
- :
press once: increases/decreases speed by 1 step, from 1 to 5;
(can also be used to select Fan ON)
press and hold: increases/decreases speed continuously (1 step per second) (can also be used to
select Fan ON)
press once: Fan ON/OFF
press and hold: Appliance ON/OFF
- e
:
- :
press once: increases/decreases the delay before switch-off by 1 step of 15 min: from 15 min to 75 min
(15,30,45,60,75 min: 1,2,3,4,5 flashing light)
press and hold: same as press once
press once: ON/OFF timer
press and hold: Appliance ON/OFF
- e
:
- :
press once: increases/decreases the brightness level by 1 step (5 levels available); (can also be used
to select Room lightning ON)
press and hold: increases/decreases the brightness level (1 step per second while held); (can also be
used to select Room lightning ON)
press once: Room lightning ON/OFF
press and hold: Appliance ON/OFF